2006 Chevy Cobalt heater not working. Blower works, only cold air coming out.
No noises present, etc. Thermostat was replaced and still NO HOT AIR!!!
HELP, I AM DESPERATE. The air-conditioning works if that helps any??
Make sure you coolant is topped up, if it is it could be the blend door actuator or the linkage attached to it that's the problem
I am saying blend door look on you tube to see if it can be reset
A broken Temperature Actuator shaft (Temperature Blend Door) could cause you to have NO HEAT.
Here’s how I fixed it... (on driver’s right leg kick panel). I used a two-part epoxy and a 1/2” aluminum (or copper) 40mm length of tubing with the broken shaft epoxied together and the metal tube should affect a long-term repair.
A little clearance on the blend doors cam actuator might be required to allow clearance for the slight additional thickness due to the metal sleeping.
Side note: to make it easy to reinstall the white plastic cam actuator, turn car on and put fan on high. It will put the blend door levers in the correct position to install the cam actuator. Install mode control actuator (top position) on first to hold Assy together while installing remaining bracket and actuator screws.
Bend door levers (controlled via (HVAC mode control switch & Heat switch) on center console.
Blend door levers
Looking for a Used Cobalt in your area?
CarGurus has 2,158 nationwide Cobalt listings starting at $1,500.
Search Chevrolet Cobalt Questions
Chevrolet Cobalt Experts
Related Models For Sale
Used Cars for Sale