CONTROL ARM & BEARING
I NEED TO REPLACE A WHEEL BEARING AND TWO FRONT LOWER CONTROL ARMS, I HAVE NEVER DONE IT BEFORE AND JUST WORRIED SOMETHING WILL SEIZE UP OR I MAY NOT HAVE ALL OF THE NECESSARY TOOLS. ANY HELPFUL ADVICE TO REMEMBER BEFORE DOING THIS?
if you're replacing the front wheel bearing and control arms you will also need to remove the CV axle from the steering knuckle. The bearing assembly is held on by 4 bolts as long as you have sockets ratchets and wrenches that should be all you need. Having an air impact gun would make things easier especially if you have a stuck bolt. If you are unsure of doing the job then I would suggest taking it to a shop.
there are good videos on you tube too like honda ase said if not good with tools and not very mechanical get help or take somewhere,
Search Dodge Caliber Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Dodge Caliber Experts