I replaced the battery on my 2007 Cadillac Escalade but I cross connected The positive cable to the negative and now the car will not show any signs of power to it
What to do when Cross battery connections on the 2007
Cadillac Escalade after correcting the connections it still
shows no electricalpower to the truck it all
This all happened upon installing a new battery
Well hopefully all you did was blow some main fuses, Check the maxi fuses first, just check fuses. Hopefully you did not damage the computer.
Check for blown main fuses in the power distribution box under the hood, replace those that have blown and then hope you didn't fry something a lot more expensive. You still may wind up at a dealer to have the system reflashed, cause you didn't replace the battery correctly. There is a little tool that almost everyone uses today that saves all of the vehicles presets when replacing the batteries, if you don't use that tool you can loose operation of things like electric mirrors, speedometers, radio, seats etc. the bad news is that in your case it would not have helped cause of the backwards install of the battery. Sorry
Blown main fuse...
Where is the main fuse
In the power distribution box under the hood, there will be more than one.
Looking for a Used Escalade in your area?
CarGurus has 10,219 nationwide Escalade listings starting at $1,900.
Search Cadillac Escalade Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Cadillac Escalade Experts