i have an 86 ram 50 i changed plug wires and valve cover gaskets and now the truck wont start i have fire and spayed fuel down the carb but nothing

i have an 86 ram 50 i changed plug wires and valve cover gaskets and now the truck wont start i have fire and spayed fuel down the carb but nothing 2 Answers

I've triple checked my timing marks but I still have symptoms of it being 180% out. It ran before I swapped the oil pump and I didn't break the timing chain... I set the distributer on the spark plug 11 Answers

I set the spark plug closest to radiator as top dead center and alighned the distributor perfect but my symptoms still say 180% out

I have cleaned the fuel lines, replaced the pickup filter, fuel filter, fuel pump, and most of the rubber fuel lines. I have fuel making it to the carb, but not working. 3 Answers

I am no mechanic, but when I force air down the two round holes on the top of the carb, it forces fuel in and runs. Take away the air and it dies. This is my des eased father in law's 1989 Dodge Pow...

why can't i get gas to my carb. 87 dodge ram 50 1 Answer

my ram 50 will only start if i put gas in the carb. I have a new fuel pump, filter, carb. and cist. Plenty of gas in the tank, new filter. This is a mechanical fuel pump.

Where is the drain and fill plug on transfercase? 1986 dodge power ram 50? Please help. 2 Answers

So.. i need to change the fluid in my transmission and transfer case. (it is a 5 speed if you were wondering) and i heard the transfer case fluid runs from transmission fluid? And where is the fill ...