does any one know where to get a good lift kit for cheap? i have a 96 1/2 ton dodge with a 3 inch body lift, 3 inch leveling kit blocks, and i just bought some 36 inch IroKs and they rub when i turn the wheel all the way left, tey only rub just a little bit, but its enough to tear up the tread, and thats obviously no good, but im just wondering where i could get a great deal on some 5 inch coil springs, thats all i need, and i dont wanna buy a new lift kit since i dont need all of it.
try jcwhitney.com $500 for a 3"lift from rough country
is it gonna be the coil springs? or just the spacers? cuz i have the spacers from rough country
go to junk yard and get 3/4 ton coils about $50+- they'll give you 3in and get 3in lift blocks from auto store bout $30 but because you already have spacers and adding this you will need a adjustable trac bar($200+-) for up front that will fix any rubbing and align your axel back evenly under the truck like it should be if you have already stacked blocks in the rear i would go to a machine shop and get one 3in taller than what you alredy have if you only have one block now you can stack them( not legally) if staking make sure you buy the blocks with the line up pin so it will lock together and that should do it or just weld them and cleanthem to make them look like one. very cheap and easy. if you get springs from a 2500 check to see if its a gas or diesel, diesel will be higher and more stiff and in order to keep it level you might have to do away with your coil spacers
ok, well its almost too late anyway, ive drove all over colorado, part of wyoming anf dow to austin texas on the iroks, so there getting close to needing replaced
Looking for a Used Ram 1500 in your area?
CarGurus has 11,483 nationwide Ram 1500 listings starting at $2,000.
Search Dodge Ram 1500 Questions
Dodge Ram 1500 Experts