I have a 2000 Town and Country. Threw a belt. Replaced it. I'm on my 6th or 7th belt, have lost count, replaced a/c compressor, tensioner assembly, and power steering pump. Threw belt again. Help!

I have a 2000 Town and Country. Threw a belt. Replaced it. I'm on my 6th or 7th belt, have lost count, replaced a/c compressor, tensioner assembly, and power steering pump. Threw belt again. Help! 2 Answers

I have recently put a new fuel pump fuel filter on my 2000 Chrysler town and country lx. Yesterday I had the ignition coil replaced due to it dieing out when I would be pushing the brake to stop. 2 Answers

Today I go out to start it b/c its cold and it won't stay running.So I push gas pedal and turn it over...Major backfire! Thought I was blowing up! Now when it starts a light knocking sound us pre...

does my 2000 t/c 3.8 have a timing belt or chain 7 Answers

need to replace timing belt or chain

I have a code 404 for egr valve on my 2007 Chrysler town and country I replaced the valve but still have the code help 1 Answer

I had a code 404 egr problem I replaced the egr cleaned all the passages on my 2007 Chrysler town and country 3.8 but after clearing the code it came back what can I do next?

i just replaced the brakes,rotors,calipers and a wheel cylinder, on a 06 town and counrty. i bleed the from the farest point to the master cylinder till it was just flowing brake fluid. and the brake pedal stil goes to he floor. there/s no leaks i'm lost on either it; the power booster or abs module 1 Answer

i bleed lines from the farest wheel up to the m/c. and there no visable leaks how do i know if its the power booster or the abs module