3.8 V-6 No spark
The full story . Last year car just died ( no code ) wound up ICM under the
coil packs went out .Replaced with used parts. Six months ago random
misfire # 4 I install plugs and wires clear codes and no more trouble Two
weeks ago random misfire # 4 code ( no spark ) with timing light replaced
all coil packs and new ICM under packs and tested fuel pressure . Good for
a week. Last week No spark no code . Install crank sensor car ran fine for
two days . This morning no spark no code !!!! SHOOT ME Whats next?
Why no codes tripping ?
OK YOU SAID IT!
You can try to re-flash the PCm that's want gives you the codes, if that doesn't work you may need to replace it...
Is that something I can do with my Innova 3150 scan tool?
So if I remove the PCM Can it be tested at the dealer with out the car ? Should I try junk yard ( used ) one ?
Is the PCm you list the PROM control and is it built into the engine control module ECM
Looking for a Used Park Avenue in your area?
CarGurus has 288 nationwide Park Avenue listings starting at $2,600.
Search Buick Park Avenue Questions
Buick Park Avenue Experts
Related Models For Sale