2000 buick lesabre shut down randomly while driving, has to sit for a whjle before it starts, sometimes wont start after being ignition is shut off and car sits for a while no eng, lite on, no codes present. have replaced fuel pump and ignition control module, car has 157,000 miles

2000 buick lesabre shut down randomly while driving, has to sit for a whjle before it starts, sometimes wont start after being ignition is shut off and car sits for a while no eng, lite on, no codes present. have replaced fuel pump and ignition control module, car has 157,000 miles 2 Answers

Changed Maf senor, crankshaft, fuses, spark plugs. fuel filter and ignition modulator and the car starts but only runs about five mins. before stalling. No engine light comes on. No bad codes show up. Can't find any bad hoses. My mechanic teacher has looked and we can't figure it out. I am a student and can't afford to fix much more and nothing I have spent money on has worked so far. When I first put the maf in the car worked great for about a week but the transmission was still skipping 2 Answers

Changed Maf sensor, crankshaft, fuses spark plug fuel filter and ignition modulator. Checked hoses. No engine light comes on no bad codes show up. After replacing maf the car worked great for a week ...

What can cause a 2000 Buick lesabre custom car to shut off while in park and its still on 1 Answer

If driving and you have to sit for awhile then the car automatically shuts off, what causes that

Where is the Ignition Module on a 1990 Buick LeSabre? The car jumps. We have replaced the Idle Arm Pulley, the harmonic balancer, the starter. Fuel pump is working fine, but I seen on this sight that someone mentioned the ignition module and to have it checked. The check engine light stays on. Someone suggested the cam sensor might be bad. How do i get codes off of this car with the tester? Please help 4 Answers

Car jumps now that we replaced the harmonic balancer. Could it be a bad one? The fuel pump has a psi of around 40 when tested. We also replaced the Idle Arm Pulley. We don't know how to pull code...

I have a Buick lesbra 95my car start run for 5mins. And shut off 4 Answers

Put a stater on it and the upper gascet on