1994 chevy k1500 4x4 4.3 vortec stalls out when i put in reverse or drive and when i come 2 a complete stop..replace wires plugs distributor cap and rotor ,injectors, fuel regulator egr valve
2 things come to mind, how does it start? Have you checked fuel pressure at the Schrader valve? you need 56 to 62 lbs. there. If you do this take note after turning it off if the pressure bleeds down. Should not bleed down more than 5 lbs, in a minutes time. The other thing would be to put a analyzer on it to see if there are any codes. There could be a bad sensor. Make sure the motor gets to operating temperature also.
it starts right up...
Search Chevrolet C/K 1500 Questions
Chevrolet C/K 1500 Experts
Related Models For Sale
Used Cars For Sale