do you lock the hubs before puting it in to 4 wheel drive?

do you lock the hubs before puting it in to 4 wheel drive? 2 Answers

well i started to work on my beonco can not find the problem it sat for 2 year 1 Answer

Replace fuel pump fuel pump relay check inertia switch the ignition module replaced the distributor cap and plugs wirers and spark plugs and is still having the same problem will try to start bu...

I have a 86 transmission will it fit in my 88 bronco 1 Answer

I bought a transmission from someone that said it would work but I pulled the numbers of the side and it was a 86 will it work in my 88 bronco

Engine code in the VIN 3 Answers

The engine VIN code is 7. The engine in the 1970 Bronco is a V-8. All my research shows it should be a G. Can anybody tell me what the 7 is?

I have a 1990 bronco with a 300 straight 6 .. I put in a new water pump an thermostat and it is still getting hot why is that 2 Answers

Well I was going out for a drive an it started to get hot so I had put a new thermostat in an it still did it so I put a low number thermostat in and it still did it ...so I got a new water pump an ...