My doors won't open on my 2000 Mazda 626
You can unlock and open the back doors from the inside. The passenger door does not work at all. Help!
does this feel like a mechanical linkage problem or a solenoid problem to you?
that looks like a purely mechanical configuration...perhaps the solenoids or vacuum devices are not shown...perhaps this is the wrong drawing...help please~
Okay, nailed it with this cartoon, yours is not a "automatic" lock, but entirely mechanical....no? ....HELP....
Hey Roy - - sorry for the delay! The strange part about the doors not opening is that the drivers door works fine!! Back doors only open if you get in and manually unlock them.
what I was getting at was runnin' around like a drunken turtle to get your answers and the only satisfaction WE get is if YOU 'mark helpful' which apparently NONE of this has been helpful...crikey, won't even tell me if this is the right drawing....looks manual but you tell me that it is automatic...so back to square one....'cept NOT rewarding when YOU aren't marking anything helpful....on that note, you're on your own~ can't helps someone who won't help back...sux~
Sorry I didn't do this right. I didn't mean to offend you by not marking as helpful.....
okay that was misinformation...that box has a fuel pump relay in it~
the kick panel, the side of the dashboard and along the dash or in the center console are some typical places for the fusebox....quite certain this territory is covered in your Owners Manual~
Thank you for all your help! I will check the fuses and see if that helps!
Looking for a Used 626 in your area?
CarGurus has 198 nationwide 626 listings and the tools to find you a great deal.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.