how do i remove the clutch hydrolic line from the tranny?

25

Asked by Sep 06, 2007 at 09:11 PM about the 1994 Ford Ranger

Question type: Maintenance & Repair

1994 ford ranger with manual transmission and 2wd

2 Answers

40,315

I believe these use a special tool similar to the ones used for A/C and fuel line removal. Check your local auto parts store for this tool.

1 out of 1 people think this is helpful.
50

There is a plastic ring that needs to be depressed with a clutch tool. If you look at it, it is white. The clutch tool is every expensive if you can find it. The same thing can be accomplished with a screwdriver. Place the flat head screw driver on the plastic ring. Using a hammer, gently tap it. I don't know how to explain the amount of force needed but hitting it too hard will damage the connector. However it will take some force to get the plastic ring to be depressed. Tap one side with the screwdriver then tap the other. Apply slightly greater force each time that you change sides. The plastic ring will disappear into the connector. When that happens, tug on the line and it will come out. To reinstall press it in till you hear it click. Nathan

5 out of 5 people think this is helpful.

Your Answer

Add photo

Related Questions

  • how do i remove the hydraulic clutch line from the tranny 4 answers

    The question is how do i remove the hydraulic line from the tranny

    1995 Ford Ranger Splash Extended Cab Stepside 4WD SB

    -

    Maintenance & Repair

  • how to release hydraulic line from clutch slave cylinder 1 answer

    I've tried using the removal tool that comes with the new slave and can't get it to release

    Ford Ranger

    -

    Maintenance & Repair

  • Clutch

    Was driving down the interstate and the truck started to slow down. I would hit the gas and it wouldn't go anywhere. I pulled off and realized I had no pressure behind the clutch. The tranny was l...

    1992 Ford Ranger Custom Standard Cab LB

    -

    Maintenance & Repair

  • Clutch/Transmission Issues 5 answers

    So I just bought a 1988 Ford Ranger. I was driving it home when the shifter stuck in fifth and won't come out. The clutch isn't spongy or overly easy to push. I'm wondering what's wrong and how b...

    1988 Ford Ranger GT Standard Cab LB

    -

    Maintenance & Repair

  • Clutch pedal went to the floor. 4 answers

    how to replace the clutch master cylinder

    Ford F-250

    -

    Maintenance & Repair

Search Ford Ranger Questions

Ford Ranger Experts

#1 FordNut
FordNut
Reputation 1,350
#2 tennisshoes
tennisshoes
Reputation 970
#3 Tracy Hooks
Tracy Hooks
Reputation 720
View All

Related Models For Sale

Used Ford F-150
3,393 Great Deals out of 205,480 listings starting at $1,273
Used Toyota Tacoma
789 Great Deals out of 33,560 listings starting at $2,988
Used Chevrolet S-10
9 Great Deals out of 1,609 listings starting at $995
Used Dodge Dakota
152 Great Deals out of 4,326 listings starting at $900
Used Dodge Ram 1500
532 Great Deals out of 12,951 listings starting at $1,800
Used GMC Sierra 1500
1,164 Great Deals out of 58,043 listings starting at $2,495
Used Jeep Wrangler
505 Great Deals out of 17,416 listings starting at $2,990
Used Ford Mustang
713 Great Deals out of 38,572 listings starting at $1,963
Used Ford Explorer
1,490 Great Deals out of 72,941 listings starting at $985

Used Cars For Sale

2011 Ford Ranger For Sale
66 Great Deals out of 1,249 listings starting at $3,000
2010 Ford Ranger For Sale
18 Great Deals out of 514 listings starting at $3,450
2009 Ford Ranger For Sale
18 Great Deals out of 392 listings starting at $4,250
2008 Ford Ranger For Sale
25 Great Deals out of 567 listings starting at $2,895
2007 Ford Ranger For Sale
22 Great Deals out of 368 listings starting at $1,995