SERVICE ENGINE LIGHT WENT ON IDLE OK NO POWER WON'T START
Check the battery voltage is it over 12V? Get a jump start and pull the codes to see what the issue is. Any local auto parts store will read them for you. Have the battery load tested while your there. Then post the 4 digit code back here.
Very helpful...have Canadian tire odb2 it says intake air temperature high ..Is it possible that sensor is defective and not allowing truck to start.? Also injector module code detected...
Is this a diesel? Post the codes you are getting.
YES IT IS A DIESEL....
Give us the codes you got.
we have a Canadian tire odb2 that says intake temperature high and injector module code detected
02 7.3 powerstroke correct?
If you are getting an injector driver module code this will keep it from starting or running. Pull the left front wheel off, take the left inner fender out, it is in the back of the fender close to drivers door. Check all connections for corrosion or broken wires. If ok replace the module.
THANKS SO MUCH...will try it...
Looking for a Used E-Series Cargo in your area?
CarGurus has 3,309 nationwide E-Series Cargo listings starting at $2,300.
Search Ford E-Series Cargo Questions
Ford E-Series Cargo Experts
Related Models For Sale
Used Cars For Sale