How do I reset ABS BRAKE SYSTEM AFTER INSTALLING BRAKE PAD
The lights are WARNINGS that things are wrong. Don't ignore them or turn them off - fix the problems. I suggest your read this article. https://www.yourmechanic.com/article/is-it-safe-to-drive-with-the-air- bag-light-on
You don't. Each time you start the vehicle the ABS and airbag system computers both run a diagnostics test on the systems. If a problem is found the system is disabled and the warning light stays on. The systems are cleared each time the ignition is turned off. These computers do not store trouble codes. HTH. -Jim
There are ABS trouble codes. If the light is on there should be a code to direct you to the problem area.
Correct, F O R, however the computer(s) must be scanned when the light(s) are on during that ignition cycle. Once the ignition is turned off the codes are cleared until the vehicle is started again and the light(s) remain on again. This can be a problem with intermittent issues. HTH. -Jim
Intermittent issues are a pain.
They sure are!! -Jim
Looking for a Used E-350 in your area?
CarGurus has 240 nationwide E-350 listings starting at $5,000.
Search Ford E-350 Questions
Ford E-350 Experts
Related Models For Sale