pulley threads
4 Answers
Rob answered 4 years ago
Yes when we took the pulleys off of my rsx we had to hold the pulley still to keep it from rotating so we could loosen it. Hope this helps.
menocar answered 4 years ago
Buy yourself the special tool for taking off the harmonic balancer. It's worth the price in time, blood and broken things. And all bolts are standard.
mperrenoud answered 4 years ago
Check with your local auto parts store and see if they will loan the harmonic balancer tool.
Shane answered 4 years ago
it is normal it is not reverse thread so just like normal. get a impact gun and a 19mm I believe. I use a dewalt 18v impact gun and only once or twice have I had it not do the job but thats when you use a air impact gun and that always works for me. if you are doing your timing belt then once the bolt is out make sure you put the engine back at tdc.
Your Answer
Related Questions
-
pulley threads 4 answers
I need 2 take off my pulleys 2 get at my timing belt need 2 know if the bolt holding the pulleys on is it righty tighty lefty loosey proper procedure? b16a2 v-tec motor
2000 Honda Civic
-
Maintenance & Repair
-
how to remove timing belt pulley bolt? 2 answers
i have an eg and i tried for a hour to remove the pulley bolt, not the belt sproket to change my belt. i tried using a 1/2" drive impact gun and also used a breaker bar with an extra long cheater bar....
Honda Civic
-
Maintenance & Repair
-
i have a 2000 honda civic ex vtec 1.6 can 1 put a 1995 vtec 1.6 engine in the car. 2 answers
I have a 1995 vtec engine that im trying to put into my 2000 Honda Civic ex will it work? Ive also noticed that there is a speed sensor by the crank shaft pulley on the 2000 engine but theres not one ...
2000 Honda Civic EX
-
Maintenance & Repair
-
Heater not working 5 answers
I have gone thru most the threads to to try and find my answer. Here is the back ground my car was hit on the drivers side front and rear door not hit hard just pushed the car about 3 feet, after I ...
2005 Honda Civic Hybrid
-
Maintenance & Repair
-
Serpentine belt 11 answers
Hi, I just installed a new serpentine belt on my Honda civic 07 LX. When I started the car, it was squealing. I drove for 2 days and it started shredding. I also realized a part of the belt was a lit...
2007 Honda Civic LX
-
Maintenance & Repair
Looking for a Used Civic in your area?
CarGurus has 73,280 nationwide Civic listings starting at $1,400.
Shortcuts
Search Honda Civic Questions
Honda Civic Experts
-
#1Tom DemyanReputation1,050
-
#2Takoda FraserReputation1,030
-
#3Jonathan FordReputation1,000
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.