after changing the oil how to reset oil setting
1. Insert the key into the ignition. Turn the ignition switch to "ON/RUN" without starting the engine. 2 Press the reset and information buttons on the control panel at the same time to enter the personalization menu. 3 Press the information button to scroll through the menu options until "Oil-Life Reset" is displayed. 4Press and hold the reset button until the display shows "Acknowledged." This indicates the oil life system has been reset. The oil light turns off.
Or you can turn the key to the on position without starting the engine and press the gas pedal to the floor three times and on the third time hold it to the floor. The oil light will reset, its probably the easiest way to reset the oil light on GM vehicles.
Pressing the gas down 3 times and holding on the third by far works the best.. thanks
Pressing the gas down 3 times and holding on the third worked for me. Thanks much
Pressing the gas pedal down 3 times and holding it is sooooooo much easier :) Thanks guys. I almost thought it would work but you have to wait about three secs to see 100%.
When I held the pedal down after the third time, nothing changed. I called my mechanic and he told me to stomp it to the floor three times, within five seconds, but don't hold it down after the third time. Then watch till the "oil life" light goes out. That means it has reset to 100%. Start the engine and it's reset.
The 3 times thing worked sooo easy thanks gus
Looking for a Used Cobalt in your area?
CarGurus has 2,581 nationwide Cobalt listings starting at $1,295.
Search Chevrolet Cobalt Questions
Chevrolet Cobalt Experts
Related Models For Sale
Used Cars For Sale