my 1.3i bantam 2008 breaks down at high revs

Asked by Feb 12, 2017 at 03:43 AM about the 2007 Ford Bantam

Question type: Maintenance & Repair

the car seams fine and when you drive it over about 3000 rpm it goes dead
until you thake your foot of the accelerator and then its perfect below
3000rpm.  the car was perfect yesterday. what could this possibly be

2 Answers

113,495

There is a few things I can think of that would cause this, your fuel pump is starting to go, try changing your fuel filter first and see what happens. If no luck test you pump pressure at low and high RPMS. Check your coil pack and wires, cam sensor and also O2 sensors

205

Check the fuel pressure at the injector rail. (between 2.5 and 3.0 Bars) If you have fitted the NGK spark plugs, Try the Motorcraft available from the Ford Dealer parts department. It could also be the ignition coil, in this case fit a genuine Ford coil pack available through you local Ford Parts department

Your Answer

Ford Bantam Experts

  • #1
    Janus Welgemoed
    Reputation
    630
  • #2
    Joel Mearns
    Reputation
    560
  • #3
    AB Zaviour
    Reputation
    490
View All

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.