I have a 2003 bantamm 1300cc Rocam. vehicle was stolen. I had new keys cut. It turns the engine but the vehicle do not want to start. Also the new key enter the barrel smooth. Once in I cant get it ou

I have a 2003 bantamm 1300cc Rocam. vehicle was stolen. I had new keys cut. It turns the engine but the vehicle do not want to start. Also the new key enter the barrel smooth. Once in I cant get it ou 2 Answers

I drive my ford bantam 1.3 and it was raining a lot and come and park it as usual.when the following morning I try to start it and it only turn the engine but it is not starting 13 Answers

I drive my ford bantam 1.3 and it was raining a lot and the following morning it jst cranking bt cnt start

i have a 2006 ford bantam rocam the engine has been done but when i start it it does not ref up it does not have a knock sensor and no wiring for that either 1 Answer

i have a 2006 ford bantam rocam the engine has been done but when i start it it does not ref up it does not have a knock sensor and no wiring for that either

How do I remove the sump of a 1.3l Rocam engine of a 2003 Ford Bantam bakkie? 4 Answers

I don't want to remove the engine from the car unless I have to, but will do so if its the easier way of getting the sump off. Quite apart from that, I ESPECIALLY don't want to disconnect the inlet- &...

how do i set the timing on a ford 1.6 rocam engine? 9 Answers

I have overalled the engine , but cannot get the timing right , is there an easy way off setting it . Lenasia