hi to all u, how do i change the cluch kits for2003 ford bantamrocam.thanx
the car does not clutch i checked the master cylinder is not of any kind i know,went to
them spare shops them also surprised to that master cylinder,open it cannot manage
Well what is it doing first of all? Your question really don't make alot of sence
2002 2003 + ford fiesta same frontend maybe fiesta , not master cylinder, that is brakes , clutch has small clutch cylinder near master brake cylinder, low fluid may be or air in system bleed at under truck at bell housing.
sorry for that,but by the cockpit there is a plastic master for the clutch its like it does not pressure out the brake fluid(build pressure),
so how do i change the kits
okay, I know what you're talkin' about....seems like lately they've designed the thing without a bleeder valve on the slave cylinder...easy for them...difficult for us...the balance of your clutch looked fairly boilerplate, just the master and NO bleeder slave cylinder is a cause for alarm...do not worry...put it together in the usual fashion and when it is time to bleed the system, fill the slave cylinder with a a syringe with the brake fluid...or turkey baster if you can find one small enough...when you get the slave cylinder full..bleed in the usual fashion using the fitting to the slave cylinder as the point at which you let the air out of the circuit...residual air will rise to this location...kinda shitty, but that's they way we roll now~
also check under dash the metal cracks and will change pedal swing
thanx have a nice blessed day motowizdats
Looking for a Used Bantam in your area?
CarGurus has thousands of nationwide listings and the tools to find you a great deal.