I've got a 96 GMC 1500350 4=4 if it would set for a week with startn it would loose prime now it takes hr to loose it and won't start
It will start with either but then u have
to push gas slow or it will die or under
load replaced pump regulator filter not
sure what the hell is going on getn
pissed at it
Sounds like a fuel pump problem, possibly the little internal check valve has gone bad. Run a fuel pressure test and flow. It most likely will fail the pressure hold part of the testing.
Need to test fuel pressure at the fuel rail
I changed it twice how much voltage should I b getn bk there
I checked it its around 56 lbs will stay running after I spray either to start
You should be getting battery voltage at the fuel pump when you first turn on the key then it will drop to 0 if the engine is not running. How much fuel pressure did it hold after the key was turned off? Go to: http://www.gm-trucks.com/forums/topic/150638-fuel-pressure- testing-on-1996-silverado-z71-4x4-57l-vortec/
I gust went out put the battery charger on the truck it started and ran fine e just don't get it
Looking for a Used Sierra C/K 1500 in your area?
CarGurus has thousands of nationwide listings and the tools to find you a great deal.
Search GMC Sierra C/K 1500 Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
GMC Sierra C/K 1500 Experts