Is UT okay to put 305 heads on a 350?
My 350 has a cracked head and I have a spare 305 laying
around and I wanted to see if it was okay to bolt the 305 heads
on my 350
Yes, but the valve & combustion chambers are much smaller & maybe the intake & exhaust ports too. Nothing to gain by this only a little more compression & less hp. Alternative, have a cylindar head shop re-do them (valves, guides, valve springs,resurface) but it's going to be expensive. Cheaper to find & use 350 heads.
Search around cylindar head services weld cracked heads now with cast welding rod.
Don't do it. It raises compression and it will spark knock like hell if you don't run high octane and adjust for it properly.
Looking for a Used C/K 10 in your area?
CarGurus has 272 nationwide C/K 10 listings starting at $19,900.
Search Chevrolet C/K 10 Questions
Chevrolet C/K 10 Experts