mine is getting gas too throttle body but not coming out of the injectors??? need some help!!!

Check the fuel injector relay?

Take the injectors off and have them bench tested. They probably are bad.

And........ maybe you're not getting enough fuel pressure. Lot of cars have plugs (as in metal and not electrical) you can hook a fuel pressure gauge to. All my vacuum gauges also have a fuel pressure gauge.

I had this happen to me,pull your enjecter out and clean the screen that goes around the injected before it goes in the injected. I found out on my own and the screen was clogged tight what the fuel filter let still by.

Who do I take it to to get it tested

Ok I fuel to the back of a tbi on a 91 chevy 2500 sub 5.7 pulse light indicates no power or pulse what's next ?

I'm on the same thing. No pulse to injectors but I have 12 volts to both injectors with ignition on. Still noide light. Replaced the whole distributor, and another ecm with no luck

I have a 1987 Chevy R20 three quarter ton 2 wheel drive 350 throttle body one day the truck just shut down I tried to start it and it would not start 1 I rebuilt the throttle body 2 I put on a new fuel pump and relay 3 I also put the new coil 4 ignition module 5 heat cooling temperature sensor replaced I also replace the injectors 1 is pouring gas out the other one sometimes drips the truck had a real rough idle and the gas got into the cylinder so bad that that contaminated the oil but my engine is fine there's no bearings nothing wrong with it I didn't leave it running that long I keep changing the oil in order to find out why my truck is not pulse spraying like it should and it seems like it's got a chuggin idle to it. I'm trying to find out and fix the problem as to why it's getting too much fuel other one of the injectors when they are new I hope someone is out there to help me I'm stranded in St Louis and I'm from Pennsylvania and my truck means everything to me it has an original thirteen thousand miles on it been in a barn it was handed down to me

Humm....? So how does this site really work how do I get someone to reply

I've looked on YouTube no luck. Well I figured I would just go out and get a new ECM computer a new distributor a coil spark plugs wires cap and rotor with ignition control module and are you sure pump relay and a new fuel pump maybe this will get me running. Well I'll soon find out tomorrow thanks a lot for all the help you guys

Oh and by the way this site sucks I thought I'd at least get one reply so I went out of my way and out of pocket is purchase story about stuff I'll fix it myself

So did u find out what was going on I would like to know I’m having a Fuel problem with my eight 1989 Chevy Silverado