how do you replace the valve cover gaskets

Asked by michaelfrazier Mar 08, 2013 at 03:49 PM about the 1998 Chrysler Cirrus

Question type: Maintenance & Repair

99,235

- Report

tenspeed answered 4 years ago

This generic video might help -- https://www.youtube.com/watch?v=zi13ACKB-VU

13 of 13 people found this helpful.

Mark helpful

3,220

- Report

mrmoony answered 4 years ago

What ever you do mark both sides of any wire junctions you undo. Masking tape and a Sharpie works well.

1 of 1 people found this helpful.

Mark helpful

Your Answer

how do you replace the valve cover gaskets 2 answers

1998 Chrysler Cirrus

-

Maintenance & Repair
How do you bleed the brakes on a 2000 Chrysler Cirrus LX? 1 answer

Where are the bleeder screws located? A picture would be great. Also, what tools are required to complete this? Will any specialty tools be necessary? Thanks in advance.

2000 Chrysler Cirrus 4 Dr LX Sedan

-

Maintenance & Repair
on the 1996 cirrus can the crankshaft sensor go out after 9 months? 6 answers

getting the same thing i had 9 months ago when i had to replace sensor

1996 Chrysler Cirrus 4 Dr LX Sedan

-

Maintenance & Repair
how to get a stuck exhaust manifold off 1 answer

I am doing a head job and I can now get the back exhaust manifold off and I want to do it without dropping the engine or the sub-frame because that will incur the cost of alignment it has the pulleys ...

2000 Chrysler Cirrus 4 Dr LXi Sedan

-

Maintenance & Repair
I have a 98 Chrysler cirrus. It has a new battery and a new alternater. It was working fine for about a week then just the other day, I couldn't get it to start. 2 answers

I put on the battery charger, but it hasn't helped.

1998 Chrysler Cirrus 4 Dr LXi Sedan

-

Maintenance & Repair

Used Chrysler Sebring

32 Great Deals out of 2,819 listings starting at $1,200

Used Dodge Stratus

830 listings

Used Buick Century

866 listings starting at $1,999

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.

#1		mooncrab00 Reputation 160
#2		tenspeed Reputation 150
#3		Tom Demyan Reputation 120

how do you replace the valve cover gaskets

2 Answers

Your Answer

Related Questions

how do you replace the valve cover gaskets 2 answers

How do you bleed the brakes on a 2000 Chrysler Cirrus LX? 1 answer

on the 1996 cirrus can the crankshaft sensor go out after 9 months? 6 answers

how to get a stuck exhaust manifold off 1 answer

I have a 98 Chrysler cirrus. It has a new battery and a new alternater. It was working fine for about a week then just the other day, I couldn't get it to start. 2 answers

Shortcuts

Search Chrysler Cirrus Questions

Chrysler Cirrus Experts

Related Models For Sale

Used Cars For Sale