Check engine light came on had it checked at auto zone it was EGR replaced it light went off after few drives next day now it's on again and took back to auto zone now it says code P1193 and P0403
So did I not drive car enough to clear first code or this is a new ones after first
one fixed, P1193 intake air temperature sensor circuit high input and P0403 is
EGR solenoid circuit, I already did EGR valve that was why check engine light
came on in first place fix that now these, any help or suggestions please.
Thank You.
Clear the codes with a scanner. Replace the air temp. sensor. Drive the vehicle to see if the codes come back.
Ok I have my son try that, do I clear the codes first then replace air sensor ? Or the opposite, and can I clear codes myself or do I need to take to a shop? Thanks so much.
You can clear the codes yourself if you have a scanner capable of doing so. Some info on the temp. sensor....P1193 CHRYSLER - Inlet Air Temperature Sensor Circuit High Condition... Possible causes; Faulty Inlet Air Temperature Sensor, Inlet Air Temperature Sensor harness is open or shorted, Inlet Air Temperature Sensor circuit poor electrical connection.
Looking for a Used PT Cruiser in your area?
CarGurus has 2,971 nationwide PT Cruiser listings starting at $695.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.