I need to remove both a front and rear bumper on a 2005 chrysler sebring convertible. What tools do I need?
You will need a small screwdriver to raise the pins in the plastic pins holding the bumper cover in front of the radiator. You might have to remove two bolts from each headlight. There should be a couple of 10mm nuts holding the cover to the fender. Remove the nuts from the wheel wells with a ratchet wrench. The bumper cover should pull free from the car. Check for any electrical connectors before yanking it off.
Search Chrysler Sebring Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Chrysler Sebring Experts