Mercury Topaz Questions Maintenance & Repair

  • Newest
  • Recently Active
  • Unanswered
Jason Johnson
0

93 Topaz Randomly Stalls When Either Driving Or Just Idling

My sons 93 topaz is continually stalling when it is driven or just idling to warm up .I have replaced the fuel filter, cleaned out the throttle changed the air filter and have also ran 2 bottles of se...

19 views with 2 answers (last answer about a week ago)
GraceC
0

Changed The Brakes In My 93 Topaz, But They Still Go Almost To The Floor Wh...

I replaced the caliper and ball bearing kit on the front passenger side, and master cylinder, and bled the brake lines. all brand new brakes all the way around. Any idea why they still go to the flo...

10 views with 2 answers (last answer about a month ago)
jonrid
0

93 Merc Topaz 2.3 Idles Too Fast. 2000 Rpm Have To Keep Foot On Brake At St...

I get a tps (throttle positin sensor) code but the two screws are frozen in position.#3 and #4 Phillips screwdriver heads won't quite mesh. Liquid wrench doesn't help. The sensor is made out of plast...

30 views with 4 answers (last answer 2 months ago)
colorado568
0

At What Engine Temp Is The Radiator Cooling Fan Supposed To Come On And Go ...

FAN IS NOT COMING ON UNTIL 217 DEGREES, GOING OFF @ 210 DEGREES, READS BETWEEN THE M AND THE L ON NORMAL ON TEMP GAUGE, SEEMS HIGH, TEMP SENSOR OHMS TEST WITHIN SPEC.

26 views with 3 answers (last answer 3 months ago)
linzygirl24
0

How Can I Tell If I Blew A Transmission Line

it felt like a line snapped underneath my driver side tire i thought it was a break line but about a half hour later my car wouldnt shift out of 2nd and underneath my car on the drivers side there w...

13 views with 1 answer (last answer 6 months ago)
neeka
0

Where Is The Fuel Pump On A 1989 Topaz

Just bought one for around the town it needs a fuel pump i have no idea where its at

63 views with 4 answers (last answer 10 months ago)
jrs041
0

What Do You Call The Clear Center Plastic Panel In Between The Two Headligh...

Need to replace clear center plastic part between the two headlights. It's a 1994 Mercury Topaz. Nobody seems to know. I believe the same styling was used on Ford's Taurus/Sable line-up. Thanks

75 views with 8 answers (last answer 6 months ago)
Sherry Spooner
0

Valve Cover Torque Specs

what are the torque specs for the valve cover so i can properly replace the gasket?

159 views with 4 answers (last answer about a year ago)
dussty
0

I Have A 1991 Mercury Topaz

my topaz is running way to rich it is burning way more fuel than it should any ideas ? thanks.

64 views with 1 answer (last answer about a year ago)
Tyler Cox
0

Why Does My Topaz Keep Losing Fire

I have a 93 topaz, we have been stuck on this for about a month now we've replaced the firing coil an the distributor plug modual and it acts the same as before we bought the cars, it willl want to c...

125 views with 2 answers (last answer 2 years ago)
bkd
0

94 Topaz Lower Control Arm

How do you remove the bolt holding the control arm up in the frame, I got the nut off no problem but the bolt wont budge at all, penetrating oil hitting with hammer, I can't get into frame to get anyt...

408 views with 3 answers (last answer 3 years ago)
mikeseeman
0

Full Of Trans Fluid But Wont Hardly Move . Why

transmission - full of fluid and wont hardly move ?

34 views with 2 answers (last answer 4 months ago)
alfredrodriguez
20

Car Overheats

54 views with 2 answers (last answer about a year ago)
vandyman
0

1989 Mercury Topaz. While Driving Car Dies. It Restarts When I Turn The Ign...

I'll be driving and the car just dies. I can restart it without any problems. This happened five times today.

100 views with 1 answer (last answer about a year ago)
1 2 next

Favorite this topic

Subscribe to Mercury Topaz Maintenance & Repair questions.

Search Mercury Topaz Questions

Mercury Topaz Experts

#1 kbro
kbro
Reputation 70
#2 diyer4life88
diyer4life88
Reputation 60
#3 Racer_X
Racer_X
Reputation 40
View All