Lexus ES 300 Questions Maintenance & Repair
- Recently Active
if the bottom two pulleys aren't spinning by hand what do I do? and if they are not suppose to spin freely why is the belt smoking?
WHEN COLD, CAR STARTS FINE BUT AFTER DRIVING FOR A LONG DISTANCE AND TURNING OFF IGNITION, IT WON'T RESTART IMMEDIATELY; MUST WAIT ABOUT 15-30 MINUTES BEFORE IT RESTARTS
I have replaced the bulbs for the tail lights and the fuses. All other lights are working except for the tail lights. Is it possible that I have something connected improperly?
If anyone has changed this sensor, I'd like some feedback to know what I'm getting myself into. Thanks
My recollection is that the charcoal canister was replaced about two years ago when the engine light came on. At first, my mechanic said we should check that the gas cap is tightly closed or replace ...
I just bought it about 1-2months ago from a good friend
the battery light comes on. is the altenaor protected by a fuse, i am not a robot
I think my son used a handi-wipe on the steering wheel and when the alcohol in it dried, it clouded up on the wooden portions of the steering wheel. Is there any way to strip the cloudy film off with...
I tested the car and felt it was running good and clean exteriors and interiors with full leather seats, no scratches. but the car vibrates when i stop near signals, while running it doesnt .Car dea...
failed smog test due to electrical wires just recently changed computers what does it mean and how can I fix it.
The left end of the valve cover sits in the inset of this timing housing. I can not figure out how to work past this problem or loosen the metal timing housing to free the top of the valve cover. Help...
Favorite this topic
Subscribe to Lexus ES 300 Maintenance & Repair questions.
Search Lexus ES 300 Questions
Lexus ES 300 Experts