Jeep Questions Any type
- Recently Active
I just bought a 1994 grand cherokee and would like to veiw the owners manual
I replace crank and cam Check all fuse
help with removing the bolt that held on the power sreering pulley. the wheel broke off into a zillion pcs, but need to get the rest off. can anyone help me?
Fluid in the throttle body and it will crank up and run until the starting fluid run out then it dies again. PLEASE HELP
We have a Jeep Grand Cherokee Laredo 2001. We had to replace a fuel pump and filter after doing that, it would great for 2-3 weeks and all of sudden on the 1st try it sounds as its trying to start ...
There is one pin on PCM that is showing ohm reading - .5? Should be ground through computer and not have ohms. What should I be checking
Need help reconnecting ground wires. The ground wire from firewall (1 wire that splits into 2) found behind the intake manifold. Where does it go? Thanks for any help.
YOU CAN START IT BACK UP BY SPRAYING STARTER FLUID IN THE INTAKE VALVE OR JUST LETTING IT SIT FOR AWHILE
I have replaced plugs, wires, cam sensor, crankshaft sensor, oxygen sensor, all of which I had gotten errors for when engine light came on.
Please help young female dont know anything about cars so basic termonolgy would be best. Thanks in advance.
Replaced ignition switch and cylinder. Now when I turn key to start position, 40 amp fuse under hood blows. Dash lights up fine
Favorite this topic
Subscribe to Jeep questions.
Search Jeep Questions