Jeep Grand Cherokee Questions Maintenance & Repair
- Recently Active
hi i have a concern a big concern about my 2000 jeep grand cherokee laredo sputtering,spitting black smoke or just backfiring like crazy,it shakes horribly and just shuts off in moving traffic or j...
how to fix light on a automatic shifter
I've already replaced Crankshaft Sensor. Here is sequence of events. I filled with gas and drove home 6.8 miles. Didn't dive for a few weeks. Decided the weather was cool enough to replace drivers doo...
My 1999 Jeep Grand Cherokee blower motor stops blowing when I accelerate then starts to blow when I deccellerate.
The hatch window was replaced and now it won't stay closed. It will go down and you can hear the lock but it will pop open again when driving.
jeep starts and runs, if I shut it off, I must wait until it cools to restart, sometimes it runs rough, sometimes not. New distributor, wires, plugs, crank sensor, throttle sensor, coil, fuel filter, ...
My 4wd is not working and just wondering the first steps on approaching what may need repair.
I replace crank and cam Check all fuse
help with removing the bolt that held on the power sreering pulley. the wheel broke off into a zillion pcs, but need to get the rest off. can anyone help me?
Fluid in the throttle body and it will crank up and run until the starting fluid run out then it dies again. PLEASE HELP
We have a Jeep Grand Cherokee Laredo 2001. We had to replace a fuel pump and filter after doing that, it would great for 2-3 weeks and all of sudden on the 1st try it sounds as its trying to start ...
Need help reconnecting ground wires. The ground wire from firewall (1 wire that splits into 2) found behind the intake manifold. Where does it go? Thanks for any help.
Replaced ignition switch and cylinder. Now when I turn key to start position, 40 amp fuse under hood blows. Dash lights up fine
Favorite this topic
Subscribe to Jeep Grand Cherokee Maintenance & Repair questions.
Search Jeep Grand Cherokee Questions
Jeep Grand Cherokee Experts