GMC Sonoma Questions Any type
- Recently Active
Was going 65 down 4-lane highway. Gauges bottomed out and it died. Now it won't start. I just kind of clicks. Husband said it almost acted like it was out of gas when it died. We put gas in it to make...
no gas, no fire, change module in distributer engine ran good , stop engine, hour later went to start did the same as before , cranks will not start no fire no gas, sat over night, engine starts runs ...
I also replaced the ignition module and it still will not start. I'm not getting any fire. What else could it be.
Is this a simple fix or major
new ignition switch. Hazards work. Fuses all good. codes PO650 & PO740. Fuses 4,10&16 not getting power. Battery light on. Runs, drives, everything else seems ok.
02 gmc sonoma 4.3 v6 4x4!!! my 2h indicator on my push button is on all the time but when swithing to 4x4 the indicator does not change to 4h or 4l and the 4x4 dont engage! so my 4x4 is a 4x2 just ...
I noticed a fuel smell in the cab of my 2000 sonoma 4 cyl seems worse when I am idling. there is no fuel leaking when the truck is not running. idling it is dripping off the transmission bell housin...
If the problem is due to the steering wheel, please give me details how to fix it my self. Thank you in advance for any information you can give me.
the rear wheel studs on the passenger side broke on me today all 5. went for a scary ride! so got truck towed home the previous owner came out and told me 3 yrs ago the same rear wheel studs broke ...
I have a 2000 GMC Sonoma. I've bypassed the neutral safety switch with two wires attached to the starter. I had been using a push button attached to the two wires, but recently it has stopped work...
I can get into 1st, 2nd, and 3rd gears with no problems, but when I shift into 4th gear, it slips out almost immediately after.
Favorite this topic
Subscribe to GMC Sonoma questions.
Search GMC Sonoma Questions
GMC Sonoma Experts