GMC Sonoma Questions Maintenance & Repair

  • Newest
  • Recently Active
  • Unanswered
jeffeilliams042276
5

My 2h Light Stays On When I Push The 4hor4l Buttons It Wont Switch And The...

02 gmc sonoma 4.3 v6 4x4!!! my 2h indicator on my push button is on all the time but when swithing to 4x4 the indicator does not change to 4h or 4l and the 4x4 dont engage! so my 4x4 is a 4x2 just ...

Michael Comeau
0

How To Fix

my truck will not go no faster then 28 mph rpms wont go no higher then 2200 rain it on a machine in it says massive air flow any idea on how to fix this problem

15 views with 4 answers (last answer about a week ago)
Nickibob
20

2003 Gmc Sonoma. Gauge Cluster Not Working. Turn Signals Not Working.

new ignition switch. Hazards work. Fuses all good. codes PO650 & PO740. Fuses 4,10&16 not getting power. Battery light on. Runs, drives, everything else seems ok.

willbershaw
0

02 Gmc Sonoma Died, Any Suggestions

the check engine light was on for a while then one day the engine just quit. After a few minutes it started back up, long enough to get a couple of blocks home then it died again. It has been starting...

19 views with 1 answer (last answer about a month ago)
Big_Al_41
0

My Fuel Guage Reads But Will Drop To Empty If I Stop Or Even Sometimes Let ...

Is this a simple fix or major

16 views with 2 answers (last answer about a month ago)
mmoo7114
10

Engine Temperature Fluctuation (4 Cyl)

Started off my commute this morning in a cold Floridian 50 degrees F and a cold engine. Ten minutes into my commute my engine temp gauge showed a 250 degree F reading.The temperature fluctuated betw...

71 views with 7 answers (last answer about a month ago)
sydvicious
10

How The Hell Do I Reenable My Truck??

my father decided to disable my truck because i went off on a tangent and when i got home he disabled it. i need it to find a damn job but he won't budge and won't either fix it himself or even help...

41 views with 7 answers (last answer about a month ago)
rickrxrx1951
0

Gmc Sonoma 1999 S/l Wiper Blade Linkage How To Access?

Passenger side wiper works, driver side doesn't-I believe the linkage may be loose, how do I access the linkage?

kendalboo
0

Electric 4x4 Push Button And Light Flashes

4 wheel drive will not clic in

113 views with 2 answers (last answer 2 months ago)
greensea
0

Upon Starting My 2001 Gmc Sonoma, This Winter. After A Short Warmup I Turn...

TRUCK DOESN'T PROVIDE HEAT WHEN WHEN KNOB IS TURNED ON. NO SOUND AT ALL.

35 views with 1 answer (last answer 3 months ago)
Seth Deen
0

Runs Rough.

It idles fine, but when I get into third or more, or if I'm idling in second, it runs really rough.But when the service engine soon light comes on, it runs fine. what's wrong? please help

42 views with 2 answers (last answer 3 months ago)
Forswty
0

I Have A 94' 2.2 Gmc Sonoma, I Am Getting No Coolant Pressure And Not Losei...

replaced fuel pump twice, water pump, thermostat, head and gasket, radiator, fuel filter and belt tensioner.and I am not getting any coolant system pressure, help!.

19 views with 1 answer (last answer 4 months ago)
jeidern
0

1993 Gmc Sonoma Clicking Noise In Dash When Accelerating 50 Mph And Above.

I have a 1993 GMC Sonoma. When I get to 50 mph and above the truck has a clicking noise coming from the dash. Anyone know what this might be.

55 views with 1 answer (last answer 6 months ago)
1 2 3 4 5 6 next

Favorite this topic

Subscribe to GMC Sonoma Maintenance & Repair questions.

Search GMC Sonoma Questions

GMC Sonoma Experts

#1 parkle
parkle
Reputation 310
#2 Mike Bonnell
Mike Bonnell
Reputation 300
#3 James Mayfield
James Mayfield
Reputation 230
View All