Sign in | Register | My account |

Ford Mustang Questions Maintenance & Repair

  • Newest
  • Recently Active
  • Unanswered
rycagle
0

Missing 1995 Ford Mustang 5.0 Ho 5 Speed

misses after changing plugs wires distributor cap and rotor button, coil pack and mass air flow sensor it has a new cold air intake as well... what could it be??

fasteddie1950
0

Where Can I Purchase The Interior Trunk Trim Fasteners For A 2005 Mustang B...

The plastic fasteners that secure the trim panels inside the truck of my 2005 Mustang have broken and the panels that cover the tail lights are loose. I've heard that these fasteners are not available...

9 views with 1 answer (last answer 3 days ago)
ballistic12gage
20

Party Streamer Stained My Foxbody

It's my birthday and mom cover my whole stang in party streamer, but the blue stained my car, anything safe out there that works

5 views with 1 answer (last answer 4 days ago)
97gtmustang
5

Need Help With My 97 Gt Mustang

no pressure in the brake lines, brake fluid wont go thru

Must2000
0

How Can We Delete Useless Answers And Only Have Ones On The Topic?

Car runs great. However, with the hotter temperatures and maybe the gasoline mixture change, it now "knocks" when the engine is hot and accelerating from around 20 or more M/H? Maybe its pre-detona...

pstephens825
0

Where Do You Put The Power Stering Fluid

not sure where to put power stering fluid

6 views with 1 answer (last answer 6 days ago)
californialobster
0

Where Is Relay For 2001 Mustang Signals

4 views with 1 answer (last answer about a week ago)
jstewa86
0

03 Mustang Will Not Turn Over

it has new battery , spark plugs and coil packs, fuel filter. but does not seem like its getting gas.

8 views with 2 answers (last answer about a week ago)
Fearless
5

1977 Cobra 2 Parts

Just recently picked up a 1977 cobra 2 that im looking to fully restore always wanted a fast back and couldnt pass up the deal now i cant find the right parts all i find is the reg. mustang 2 i need t...

Tneagle11
5

66 Mustang Turns Over While Connecting New Battery

I am replacing the battery in a 66 mustang. When I connect the cables the car attempts to turnover. No key in ignition.

14 views with 3 answers (last answer 2 weeks ago)
Tneagle11
5

While Charging My 1966 Mustang, I Went To Start The Car And All Electrical ...

The battery is new. The car just sat through winter and I did not disconnect battery. Now there is no electrical power at all. The car has a 289

18 views with 7 answers (last answer 2 weeks ago)
ballistic12gage
20

Bad Noise, Could Be Bearing Or Axle Don't Know Witch

I am having the noise issue, my guess is either bearings or axle, along with this every time the wheel turned and hit the spot Making the noise, my speedometer would skip with it. I recorded it on...

Barrybarry
0

Hen I Start Off In First Gear The Car Shakes Especially On A Up Hill When R...

I have replaced the clutch, flywheel, throw-out bearing three times in my 1996 v6 mustang in the past year. Works great for a few weeks then only after the car is driven 30 minutes in warm weather, ...

dsmith62
0

How Do You Reset The Inerita Switch On A 2006 Mustang

hit a curb and the car died and wont restart. How do you reset the fuel switch?

14 views with 1 answer (last answer 2 weeks ago)
1 2 3 4 5 ... 29 next

Favorite this topic

Subscribe to Ford Mustang Maintenance & Repair questions.

Search Ford Mustang Questions

Ford Mustang Experts

#1 Tom Demyan
Tom Demyan
Reputation 1,390
#2 carGrrl
carGrrl
Reputation 570
#3 tenspeed
tenspeed
Reputation 470
View All