Ford Fairmont Questions Any type
- Newest
- Recently Active
- Unanswered
Where Is The Exhaust Temperature Sensor Located
car runs fine for awhile then shuts down.
Does Anybody In Here Know What Other Ford Vechs Are Changeable / Match Up W...
i am looking for info for other 80's cars that the front suspension parts are changeable with the fairmont
Why Does It Act As If It Has No Engine Power.
1981 FAIRMONT/3.3 91K. STILL HAS CAT CONVERTER. EXCESSIVE FUEL CONSUMPTION. DID I SAY EXCESSIVE?
What Longtube Headers Fit The Best In A Fairmont
I have a 81 Ford Fairmont Futura with a 5.0 5speed swap and was wondering which long tube header fits the best with that swap and the straight six k member
'79 Fairmont Wagon.. Is It Reliable Enough To Use As A Daily Driver If It H...
found a lo mile wagon ... what was there reliability history? needs alot of shop work and whats the mpg
I Need Tail Light Of Fairmont Futura Coupe 1979. Where I Can Get? I Thank Y...
The tail light I need are the right and left full.
I Have A 1978 Fairmont Wagon 302 V8 Roller -- Parts Car For Drag Racer -- R...
Great handling Fairmont wagen with sway bar from sedan. Not driven in mnay years. Only recently learned they were used in drag racing. Large tree fell and put a very large dent in rear roof.
Looking For A 1980 Ford Fairmont Wagon Left Taillight Can Anyone Help
Need 80 ford fairmont wagon left taillight
Fairmont Cowl Hood Availability
I see pictures of Ford Fairmonts with after market Cowl hoods. Where can I find on
Window Felt
I am looking for window felt for my Fairmont Wagon. So far I haven't been able to find a place that sells it. I don't want to us a "universal fit" if I can help it... Thanks, Greg
V8 Conversion
I just picked up a z7 with a I6 in it, I have a 351w to put in it but am unclear about the K-member, I have been told that a k-member out of a mustang will not work, Is this true? I have also been tol...
How To Change Rear Axel From Four Lug To Five Lug
whould it be better to change the whole rearend or can I just change the axels to go from the four studs to five studs for a wider rear tire
Drive Shaft Balancer???
OK! I just replaced u-joints and was doing the trans yoke and a round metal ring feel off as I was popping the last cap on the u/joint, It has a HT stamped on it! The drive shaft has the usual balance...
Favorite this topic
Subscribe to Ford Fairmont questions.
| #1 |
|
Dylan Higgins
Reputation
50
|
| #2 |
|
351_Stymeesmont
Reputation
40
|
| #3 |
|
tenspeed
Reputation
20
|