Ford F-250 Questions Maintenance & Repair

  • Newest
  • Recently Active
  • Unanswered

Truck Won't Start.

I replaced key switch and lock set in my 1990 f250. At same time I replaced ignition switch lever. Put everything back together everything seems to work. I am not getting any power.

Duane Christina

Why Do I Have To Hold The Key In The On Position So It Will Stay Running?

I have put two different ignitions in my 1987 f250 yet when I start the truck I have to hold it in the one position or it will shut off, any ideas

6 views with 1 answer (last answer about a week ago)

Hi All, So I Have A 1990 Ford F-250 And It's Been Overheating. And When It ...

The thermostat was just changed. When I open the lid on the radiator when truck is cold then started I can see the water getting sucked down so assuming the water pump is working. And last time m...


Engine Swap

I Have a 1994 F250 4x4 ext. cab. The motor a 351 has no power towing my 16ft trailer with a UTV on it. the gearing or whatever is geared low, first gear is actually granny gear that I have no need fo...


I Have A 1990 F250 I Replaced The Fuel Pump But It Wont Engage Any Ideas

when i turn the key itll hum then click three times then wont work is it a fuse of clogged line?

Anton-Honore Vicomte de l'Amante-Oubliee

My 1972 Ford F250 Is Sputtering When I Step On The Accelerator Unless I Giv...

I am not sure about the Mallory distributor cap and rotor but I ordered a new one and changed the spark plugs. It was driving fine before I moved from Vermont to long island.

9 views with 1 answer (last answer 2 weeks ago)

1979 Ford F250 460 Knock??

Hi guys, i have a 79 f250 with the 7.5 v8 that has been modified. Just today the engine started making a knock sound. Its fairly loud and every time i give it throttle it gets louder and faster and ...

8 views with 2 answers (last answer 2 weeks ago)
Brian Evans

Why Does My Truck Keep Dying Out?

It seems that when i turn right the truck dies out.

11 views with 3 answers (last answer 3 weeks ago)

I Have A 91 F-250 5.8 4wd . What Are The Correct Mounting Bolts For The St...

I've been to several dealers in my area and they all give me 3/8 x 16 x 1 9/16 bolts. they are too long by about 1/4 inch. Also, right above the upper bolt, there is a missing bolt. It holds the be...


1988 250 Fuel Injection No Start After Replacing Clutch

it cranks but wont start has fuel is it possible to some how I moved the timing


1988 Ford F250 Truck Rums Great For About Two Hours Then Shuts Off, Won't S...

Put a new cpu in it new cap and rotor , new fuel pump, ignition module, tried practically everything I could think of and still haven't fixed the problem

10 views with 6 answers (last answer 4 weeks ago)

5.8 L Excessive Oil Consumption

1996 F250 with 351 engine uses a quart of oil every 400-500hundred miles. Tail pipe has black sticky residue inside. No smoke at exhaust. 84000 actual miles. I've tried different weight oils and addit...

Sia MAck

Switch On The 4*4 On My F-250 And The Steering Wheel Goes Crazy!! Turning A...

When I turn on the all wheel drive switch to either hi or low the wheel goes off in different directions and the tires don't follow and the car fells like its gonna stall, it worked fine a year ago....


Have An 87 Ford F250 With A 460 Engine And Carburetor I Can Get It To Run F...

It will only run for about a mile before I have to pull over sniff let it sit do it will run properly

11 views with 1 answer (last answer about a month ago)

The Previous Owner Of My F250 Decided To Slap On Ultra Cheap Headers Now It...

1969 F250 Highboy with a 390 and 750 weber/carter carb manual of course w/ granny tranny

12 views with 2 answers (last answer about a month ago)

89 5.8 Hard To Start And Die Out Right After Start

I am having problems with my 5.8 it did not want to run after starting i installed plugs with gap of .044 along with new cap and rotor. Now it is harder to start and will die out after starting. I c...

28 views with 12 answers (last answer about a week ago)

89 F250 5.8 Hard To Start And You Have To Feather The Fuel To Keep It Runni...

This is a low miles truck one owner and the problem just started a couple days ago. You have to pump the acc to get it to start and then to get it to run you have to feather the pedal.

28 views with 4 answers (last answer about a month ago)

My Ac Clutch Fuse Keeps Blowing As Soon As I Turn It On. Could It Be The Pr...

its a 2004 f250 with a 6.0 engine

25 views with 4 answers (last answer about a month ago)
Danny Murphy

I Have A 2007 F250. I Used An Adapter In My Power Outlet And Now My Outlets...

5 views with 1 answer (last answer 3 weeks ago)
1 2 3 4 5 ... 14 next

Favorite this topic

Subscribe to Ford F-250 Maintenance & Repair questions.


Search Ford F-250 Questions

Ford F-250 Experts

#1 dandyoun
Reputation 310
#2 tennisshoes
Reputation 260
#3 FordNut
Reputation 230
View All

Related Models For Sale

Used Ford F-150"
1,866 Great Deals out of 110,116 listings starting at $1,350
Used Ford F-250 Super Duty"
463 Great Deals out of 38,707 listings starting at $1,995
Used Ford F-350"
309 listings
Used Dodge Ram Pickup 2500"
154 Great Deals out of 4,531 listings starting at $2,900
Used Chevrolet Silverado 2500"
10 Great Deals out of 252 listings starting at $2,495
Used Chevrolet Silverado 2500HD"
400 Great Deals out of 30,118 listings starting at $2,975
Used Ford F-350 Super Duty"
449 Great Deals out of 24,542 listings starting at $2,750
Used Chevrolet Silverado 1500"
1,585 Great Deals out of 137,155 listings starting at $1,450
Used Dodge Ram Pickup 1500"
549 Great Deals out of 11,147 listings starting at $1,499
Used GMC Sierra 1500"
663 Great Deals out of 59,315 listings starting at $1,590
Used Toyota Tundra"
386 Great Deals out of 17,431 listings starting at $1,400
Used GMC Sierra 2500"
4 Great Deals out of 173 listings starting at $5,900
Used GMC Sierra 2500HD"
161 Great Deals out of 12,242 listings starting at $3,500
Used Jeep Wrangler"
397 Great Deals out of 42,442 listings starting at $1,800
Used Dodge Ram Pickup 3500"
125 Great Deals out of 2,075 listings starting at $4,700