Ford E-150 Questions Maintenance & Repair
- Recently Active
I replaced an IAC valve on a 97 Ford E-150 with a 4.6L v-8 due to it making an annoying, loud humming noise. After replacing the valve on the first attempt to start the engine the humming got worse ...
the battery is good and the alternator is new and it is not charging I check all fuses are good. the instrumental panel is dead too. some can tell me what is the problem?
2012 E150 CARGO HIT IN REAR. MOUNTS DISFIGURED AND BOTH RAIL HAVE BEND ABOUT 2 FEET INWARD. COULD POSSIBLY HEAT WHILE PULLING BUT IS THAT ALLOWED OR ONLY A "COLD" PULL AND HAMMERING REPAIR ATTEMPT AL...
Battery was shot so we put a new battery in. As soon as the bartery was hooked up the truck started by itself. The truck does not have remote start and he had the key in his pocket. The truck then...
bought the van used and finding things wrong , gas only leaks when i put gas in after that its dry and not leaking so i think its the fill hose but don't find how to remove it the van sets to low an...
Tranny seems to be having a hard time going from 1st to 2nd gear....once it's going it seems fine. Before we spend money replacing the transmission, is there anything else that could be causing it? ...
have a 2003 ford e150 van , the abs motor is still running after key is out of van. I have to unplug the fuse to stop it from running, ive sent abs module out twice already to be rebuilt spending a lo...
when I start the van and run it without running any of the "accessories" the temp gauge stays right in the middle of the normal range. However, when ever I turn on just one of these "accessories" (...
Favorite this topic
Subscribe to Ford E-150 Maintenance & Repair questions.
Search Ford E-150 Questions
Ford E-150 Experts