Dodge Ram 50 Pickup Questions Any type
- Recently Active
I'm just dumb and didn't notice the arrow when I replaced the lines and filters
im swaping engines on a1987 d 50. im trying to identify the replacement moters size the casting on the block is H615 WHAT SIZE IS THIS?
replacing the water pump, timing belt and silent shaft but I can't figure how to get the silent shaft on because the pulley on the crank shaft has to come off so I can slip the belt on.
I previously floated my valves, and I think I bought it with fried piston rings (didn't know at the time )
I have a 1985 dodge D50 with a 4cyl... In the past 2 years I have replaced my starter/solenoid 3 times...each time it's the same problem, it starts clicking like its a bad solenoid. If I keep turnin...
Having problems getting to the bolts on my starter . Can't seem to get enough leverage.
Got a 1989 Ram 50 2.6L, trying to replace the fuel pump, but it is hitting the carb, which will not let it come off the head studs all the way...please help.
Is there a timeing mark or position the shaft has to be in to counter balance the left silent shaft?
Favorite this topic
Subscribe to Dodge Ram 50 Pickup questions.
Search Dodge Ram 50 Pickup Questions
Dodge Ram 50 Pickup Experts