Chrysler Concorde Questions Maintenance & Repair
- Recently Active
Changed bcm and atc. Atc controls work perfect 4/3 minutes then they just stopped working screen blanks out no control on high also for some reason the wipers don't work no power going to control
the dash indicator light for the cruise control does not come on and the cruise does not operate.
new battery new alternator but running on battery only is it likerly the ecu after cable switch sparks heated wires
had a head job done now I keep getting PO code 132 and 152 2.7 engine what is the cause changed all 4 sencers
It wont start battery is good
I have only heard the noise on cold starts. After it is started you can shut the engine off and start it again with no noise. No dash lights or codes show. It does not sound like lifters to me. Any th...
Replaced the fuel pump
I stopped to run an errand..and before i shut my car off it was fine the speedometer was working, shut it off, turned it back on then drove a ways. realizing it was jerking when i was driving and my...
My a/c only blows air not vold air. I was told today its not the belts or freon or compressor but the blend door. They also told me was working on passenger side only which when i tested it ...
Favorite this topic
Subscribe to Chrysler Concorde Maintenance & Repair questions.
Search Chrysler Concorde Questions
Chrysler Concorde Experts