Chevrolet C/K 1500 Questions Car Customization

  • Newest
  • Recently Active
  • Unanswered
Tom Moser

Can I Use A 1998 5.7 Vortec Automatic Wire Harness For A 5 Speed Manual Tra...

I have a 1998 vortec that I want to put in my 1989 chevy 4x4 . The vortec had a automatic transmission and I need to rewire my truck also and I have the wire harness for the vortec with auto transmi...

2 views with 1 answer (last answer about a week ago)

Why Does My Rpm Mph Gauges In My 97 Chevy Silverado 1500 Stop Working?

I be driving down the street and both of the gauges drop down to zero and when I try to give it gas it feels heavy please help .


1996 Efi Vortec External Fuel Pump

I'm tired of pulling my tank and wondering the requirements I have to meet to switch to a external fuel pump. I have a 1996 chevy Silverado 1500 with a 350 vortec. Thanks in advance for your help.


Ned Help With Installation With After Market Gauges(have Pics)

88 Chevy Cheyenne c1500 v6 4.3 rear wheel drive standard cab: need some help on installing these after market gauge i got from a garage sale. My 88 cheyene is a base 3speed moony with just the speedo...

11 views with 1 answer (last answer 2 months ago)

1992 Chevrolet Silverado Lt1 Swap

I have a 92 with a blown 350 crate engine and a 700r4 tranny I am looking into buying a lt1 5.7 out of a 93 corvette I was wondering if it'd go in nicely or would I need any special parts to make ...

33 views with 2 answers (last answer 2 months ago)

Hey Guys I Have An 89 Silverado With A 350 Small Block In It And Was Wantin...

wanting to add power/speed to my truck and am fairly new to engine customization so i would really apreciate the help. was told that an lt1 has similar if not same mounting brackets but am looking for...

39 views with 2 answers (last answer 3 months ago)

Knock Sensor

I have a 1993 Silverado 2wd, with the 5.7 TBI, with auto trans. My question is, I want to install a 'gear drive' timing set. Problem is, all of the gear drives I've looked at say "Not to be installe...

32 views with 1 answer (last answer 4 months ago)
Shane Earles

Won't Go Into First Gear

My 97 k1500 won't go into first, it's a automatic and when I try to drive it, it starts In 2nd and cycles through the gears, but it won't start in 1st. Anyone know what's wrong?

67 views with 8 answers (last answer about a month ago)
Keaton Parish

How Do I Get The Tool Box That Has The Jack And The Other Stuff Out Of A 19...

There is a big long peice of metal that is threaded around one of the bolts

38 views with 1 answer (last answer 4 months ago)
Desmond Freeman

Alright You Guys I Have A 1999 Suburban With A 350 Vortec,i Also Have A 199...

I want to put the vortec in the silvarado,but I need to know if there is something that is going to prevent me from doing that please help I need them both ready for a car show in about a month

13 views with 2 answers (last answer 5 months ago)

Does A Grill From A Silverado From The Year 1995-1998 Fit A 1993 Silverado?...

I want to put a custom grill from a silverado from the year 1995-1998 on my 1993 silverado and everyone keeps on telling me that it wont fit. is it true?

157 views with 2 answers (last answer 8 months ago)
Patrick Wells


22 views with 2 answers (last answer 9 months ago)

Which K&n Filter Type Is Best For A 350 5.7l Engine?

I am about to buy a K&N setup for My truck. It has a 350 5.7L V8. I currently have the round type air filter on it. I would like someone to help me weigh the pro's n cons of the following 2 styles o...

161 views with 2 answers (last answer 10 months ago)
1 2 3 4 next

Favorite this topic

Subscribe to Chevrolet C/K 1500 Car Customization questions.


Search Chevrolet C/K 1500 Questions

Chevrolet C/K 1500 Experts

#1 John Saffrahn
John Saffrahn
Reputation 1,460
#2 Andrew Olsen
Andrew Olsen
Reputation 980
#3 Jamie Groeneweg
Jamie Groeneweg
Reputation 530
View All