Sign in | Register | My account |

Acura CL Questions Maintenance & Repair

  • Newest
  • Recently Active
  • Unanswered
nellebelle
0

How Do I Test My Fuses Without Taking Them All Out? I Don't Have The Cover ...

I DON'T HAVE THE COVER TO MY FUSE PANEL, HOW DO I TEST MY FUSES? i NEED TO TEST THE ONE TO MY STEREO.

27 views with 2 answers (last answer about a month ago)
nellebelle
0

What Are The 3 Keyholes In My Used 1997 Acura Cl For?

want to know what the key holes are for by the fuse panel and by the gear shift are.

19 views with 1 answer (last answer about a month ago)
nellebelle
0

What Is The Cause For My Car Not To Go In Park?

I went to park my 1997 acura cl and it won't go into park. What is wrong with it?

27 views with 1 answer (last answer 2 months ago)
JaySchultz
0

1997 Cl 3.0 - Drivers Power Seat; Forward And Reverse Works Intermittently....

The driver's side power seat control for moving forward and back only works intermittently, more not working than working. Is there a simple repair to try before taking it to the shop?

43 views with 1 answer (last answer 2 months ago)
carlosdasilva66
0

My 1997 Acura Cl Has No Dash Board Lights And No Tail End Running Lights An...

i have checked the in dash fuse box, and the fuses under the hood

carlosdasilva66
0

Hi Its Me Again About My Acura.

i didnt do a compression test because when i run the motor and leave the crank sensor on it runs nice no noise no nocking nothing but the minute i clear the code it starts shaking and drops idel and...

18 views with 1 answer (last answer 5 months ago)
carlosdasilva66
0

This Is Concerning The Answere To My Question About My 1997 Acura Cl 3.0

my 1997 acura cl 3.0 is having a low idle problem and the computer code is telling me that the crankshaft sensor isnt working and yes its pluged in but would the motor be able to run without it and ...

39 views with 1 answer (last answer 5 months ago)
carlosdasilva66
0

On My Acura Cl 3.0 That I Did The Timing Belt And Pump It Runs When U Start...

i know i was told the timing might be a couple tooth off but the motor starts and i can drive it around the parking lot it doesnt back fire but when its in park it runs really low rpms and sometimes...

54 views with 1 answer (last answer 5 months ago)
carlosdasilva66
0

I Just Installed A New Timing Belt On A 1997 Acura Cl 3.0

the car runs but its rough at low rpms can i adjust the timing without having to open the motor back up

46 views with 1 answer (last answer 5 months ago)
forrestrogers
0

At What Mileage Is It Recommended To Change The Timing Belt On A 1999 Acura...

Im thinking about buying this 1999 Acura CL and the guy wants $4,000.00 for it. It has 138,000 mi on it. The interior and exterior are in great shape. I want to make sure the engine is in good shap...

98 views with 2 answers (last answer 2 months ago)
Marcus Tennie
0

I Have A Acura That Is Having A Little Problem.

When I start my car up it cuts off. The only way it stay on is if I hit the gas kinda hard it will stay on and I can drive it. When I take off I have to hit the gas hard for it to go instead of cutt...

47 views with 1 answer (last answer 6 months ago)
hoppertonj
0

How Do I Adjust The Clutch In My 1998 Accura Cl ?

44 views with 1 answer (last answer 9 months ago)
carlosdasilva66
0

I Placed The Add That My Running Lights Dont Work And Also My Dash Board Li...

like i said i have tested both fuse boxes they were all good .coud it be the headlight switch on the steering columb where u turn the running lights and the second turn it turns the head lights .

1 2 3 next

Favorite this topic

Subscribe to Acura CL Maintenance & Repair questions.

Search Acura CL Questions

Acura CL Experts

#1 ss1007
ss1007
Reputation 60
#2 tenspeed
tenspeed
Reputation 50
#3 Racer_X
Racer_X
Reputation 30
View All