AMC Questions Maintenance & Repair
1962 Amc Rambler American Transmission
i have a 62 rambler american it is a 3 speed trans you have to shift manuelly but there is no clutch pedal. the car drives fine but you cannot shift the gears while the engine is running, sometimes ...
Rocker Arm Rattle 327 Amc
I have Rocker arm rattle on rt side during test drive, oil pressure drops from 55 to 25 only when it gets to 190. Checked oil level hot and cold , dip stick reads good.
Car Heater System
Hi I have a 1961 Rambler classic V8 with AC 4.1, 250 I replaced all the heater system parts but my research into how the water hoses hook up is not clear Six connection points. Two from the engine,...
Vacuum Smog Lines 77 AMC Pacer 232 2 Barrel
Vacuum smgg ;lines 1977 AMC Pacer 232 2 barrel
Nuts Holding Passenger Side Bucket Seat Mystery
I have a mysterious type question that relates to a 1963 murder mystery and a 1970 Javelin Do the nuts to the bolts holding the passenger bucket seat attach from the underneath of the car of a 1970...
Possible Reason 1965 Rambler American Flathead 6 Stall Out When Put It In G...
possible reason 1965 rambler american: automatic, flathead 6 stall out when put it in gear
1966 Amc Rambler 232 Straight Six
I just bought my rambler about three months ago,I have rebuilt the carburetor and put all new brakes on with a couple of other minor fix ups. Now I have noticed that my oil pressure gauge isn’t rea...
I Have A 68 Javelin And The Breaks Are Super Toucy! What Should I Do?
I'm restoring my 68 Javelin and the breaks are touchy and lock up. What should I do?
I Own A 1974 Amc Javelin Amx. I Have Recently Replaced All Of The Hardware,...
As noted above, all new brake parts on every corner. I have even disconected the e-brake and they still lock up.The old resevoir was the type that would be found on a car with disc brakes in the front...
My Flex Plate On My 1965 Flash-o-matic Loosened An Egged Out The Bolt Holes...
My transmission shop says they cannot locate a flex plate thru their sources. So I called a local AMC fan who said he had one from a 1968. He said to weld the holes and then have them re-drilled. M...
Car Wont Stay Running
Starts then acts like not getting gas and dies. Only idles right a couple seconds and only if it sets for about a day. Fuel pressure to carb is good and has clean gas and good air flow no vapor l...
1965 Rambler Valve Adjustment OHV
1965 Rambler American 440. What is the valve adjustment sequence for this model?
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.