All Car Questions

  • Newest
  • Recently Active
  • Unanswered
Dakotacolin
5

Wheel Grinding

I just bought 97 Dodge durango rims and tires for my 92 Dodge Dakota and when I drive the bleeder nipple grinds on the inside of the rim. i know i can just put spacers on but i dont want my wheel to...

68 views with 2 answers (last answer about a year ago)
Alawry12
0

Struggle To Get The Truck In 1st 2nd And Reverse When Engines Running Could...

Goes in gear fine when engines off but sort of grates or doesn't go in 1st 2nd or reverse when engine running what could it be as want to sell the truck

63 views with 2 answers (last answer about a year ago)
jerry1972
0

What Should I Check?

I GOT 89 HONDA CIVIC LX. I WAS DRIVNG IT AT 70MPH WHEN THE OIL LIGHT FLASHED COUPLE TIMES AND THE CAR DIED. WHEN I TRY TO CRANK IT IT SOUNDS LIKE IT JUMPED TIME BUT THE BELT IS STILL TIGHT. WHAT SHOUL...

31 views with 2 answers (last answer about a year ago)
Barbara Kerr
0

What Does A "focus Error" Message Mean On The Radio Screen Of A 2007 Ford F...

The CD player has not been working well. It stops and then will start again a few minutes later in the same place it stopped. Now I am getting a message on the radio screen that states "Focus Error....

93 views with 1 answer (last answer about a year ago)
whatnow
5

Car Won't Start

after adjusting my valves I had trouble reconnecting the black hose linked to the valve cover and air filter cover so I disconnected the smaller hose that loops over the middle (it's metal in that are...

173 views with 1 answer (last answer about a year ago)
cablman
0

My Tempture Guage Is Not Working On My 1999 Toyota Tacomma

29 views with 1 answer (last answer about a year ago)
jerry1972
0

I Have A 1989 Honda Civic Lx.i Was Driving It At 70 Mph. The Oil Light Flas...

16 views with 1 answer (last answer about a year ago)
Fordcmaxfan
10

Where Are The Ads For The Ford C-max?

I own a Ford C-Max and I/we are really enjoying it. I have had it for nearly 11 months now. I have noticed for the past 11 months that the Ford C-Max is rarely if ever seen on or in any Ford adverti...

103 views with 4 answers (last answer about a year ago)
Laura Tatro
5

Awd Dash Light On. Clunking And Grinding After Being Told It Was Rust. Muc...

Ford Edge 2013 was told grinding was rust on break. typical of this car. Grinding today went to clunking, grinding and things moving around inside somewhere with AWD dash light going on

184 views with 4 answers (last answer 3 months ago)
Zonic Ort
0

Car Won't Start , I Can Hear The Crank Noise But Won't Start.

I checked the fuses replace mostly all of them, battery good , starter good, what might be the problem? Maybe a short cut? Or gas pump is blocked?

232 views with 1 answer (last answer about a year ago)
ejtmiata
0

2011 Highlander With Change Oil Message

How do I reset the display to stop the reminder for Oil change on my 2011 Highlander? I use a key to start the engine. The instructions on line refer mostly to the smart key. I had my oil changed loc...

198 views with 1 answer (last answer about a year ago)
jeansturm40
0

2000 Dodge Neon Wont Start

got my neon stuck in the snow was making a noise on the right side by the power steering belt noise stopped now car wont start replaced battery started up and back fired then wouldnt start again but...

35 views with 2 answers (last answer about a year ago)
tymoney78
5

My 97 Grand Jeep Cherokee Is Leaking Power Steering Fluid How Much Will It ...

About 3 days ago was driving the truck it was making funny sounds and the steering wheel was becoming harder and harder to turn I made it home kept the car running so I could see if anything was leak...

457 views with 2 answers (last answer about a year ago)
AlLeeKelly10
0

How To Build A 1995 Chevy Motor 4x4

27 views with 1 answer (last answer about a year ago)
AlLeeKelly10
0

How Can I Build A Moter On A Chevy 1995 4x4

26 views with 1 answer (last answer about a year ago)
ROBB007
0

Ford Escape High Idol ??won't Come Down..

My Ford Escape in the morning when cold runs really high on the idol.. When I leave it for 10 minutes and start it again it comes down could it be the seals under the plastic housing?Help??

124 views with 2 answers (last answer about a year ago)
Nuk Brian
0

I Have A 2000 Grand Prix & When I Start It All The Lights Come On But The C...

18 views with 1 answer (last answer about a year ago)
Kingshizzl
0

The Mounting Bolts For My Engine Cradle Broke Off. The Part Of The Subframe...

198 views with 2 answers (last answer about a year ago)
Nuk Brian
0

I Have A 2000 Grand Prix , Its Been Running Fine But Today When I Tried To ...

26 views with 1 answer (last answer about a year ago)
jenmcdowell8112
5

Popping And Jerking And Skipping

I have a 1996 Gmc Sierra and we have replaced the ignition coil and o2 censors and it is still skipping and popping and Jerking when in take off. But when you are on the gas it is not that bad but whe...

117 views with 1 answer (last answer about a year ago)

Favorite Topics

Track new questions that interest you

or

Sign in

Ask a Question

CarGurus Experts

#1 Tom Demyan
Tom Demyan
Reputation 137,525
#2 dandyoun
dandyoun
Reputation 76,895
#3 tenspeed
tenspeed
Reputation 68,535
#4 FordNut
FordNut
Reputation 51,845
#5 tennisshoes
tennisshoes
Reputation 40,635
View All