how do you remove the drive belt pully & is there a bearing to the shaft that holds the drive belt pully?

Asked by papiray Feb 15, 2013 at 10:24 PM about the 2000 Mitsubishi Galant LS

Question type: Maintenance & Repair

serpintine belt keeps jumping off the drive belt pully.

23,345

- Report

judge_roy answered 4 months ago

the bearing on your tensioner is out of whack. check the alignment of your idler arm.

Mark helpful

32,725

- Report

DavidH25 answered 4 months ago

What IS 'drive belt pulley?" Bob is correct the tensioner is not keeping it tight, did you change it and put the wrong belt back on? Credit where credit is due, tenspeed learnt me count the grooves in one of the belt driven devices, then count the grooves on belt. Now,,, a serpentine runs on some thing on the back, or flat side

Mark helpful

Your Answer

have a 1999 Mitsubishi Galant with a 3.0L V6. I am trying to change the Alternator drive belt (serpentine belt) and i can not see what loosens the belt tension? Please help. 10 answers

1999 Mitsubishi Galant ES V6

-

Maintenance & Repair
my water pump was leaking then stop and is making noises does that mean it need replaced 5 answers

leaking then stop now making noises

1994 Mitsubishi Galant LS

-

Maintenance & Repair
Cyclic noise in drive belt area 3 answers

On my 2003 Outlander (2.0L gas engine) , I have a cyclic noise (kind of "tchip, tchip, tchip,...") at approximately 6 Hz, coming from the accessory drive belt area, when the engine is running at idle....

2003 Mitsubishi Outlander LS AWD

-

Maintenance & Repair
Bearings noise. 1 answer

My mitsubishi montero 2001 has a sound when is running, the sound is like defective bearing, where can the sound come from?

2001 Mitsubishi Montero XLS 4WD

-

Maintenance & Repair
when removing to timing cover does the bottom pully have to come off first since the timming cover is behind it 1 answer

i have tooken all the bolt or nuts on the timming cover still can not remove it to get to water pump. I do not understand why they made it where the timming cover is behind the pully where you can n...

1994 Mitsubishi Mighty Max Pickup 2 Dr STD Standard Cab SB

-

Maintenance & Repair

Looking for a Used Galant in your area?

CarGurus has 3,340 nationwide Galant listings starting at $2,695.

#1		Tom Demyan Reputation 180
#2		Matt Rodriguez Reputation 120
#3		Rishi Patel Reputation 80

how do you remove the drive belt pully & is there a bearing to the shaft that holds the drive belt pully?

2 Answers

Your Answer

Related Questions

have a 1999 Mitsubishi Galant with a 3.0L V6. I am trying to change the Alternator drive belt (serpentine belt) and i can not see what loosens the belt tension? Please help. 10 answers

my water pump was leaking then stop and is making noises does that mean it need replaced 5 answers

Cyclic noise in drive belt area 3 answers

Bearings noise. 1 answer

when removing to timing cover does the bottom pully have to come off first since the timming cover is behind it 1 answer

Shortcuts

Search Mitsubishi Galant Questions

Mitsubishi Galant Experts

Related Models For Sale

Used Cars For Sale