1992 mazda navajo will not start no power
2 Answers
Tom answered 11 months ago
Probably the battery. Borrow a voltmeter and test it, should be 12.4Volts across the terminals. If not, then new battery, if you do have voltage, check you battery cable connections.
aztec626bf answered 11 months ago
Most likely a bad connection on battery. Take the battery terminals off and clean them up nice and shinny and clean the battery posts up to a shine.
Your Answer
Related Questions
-
how do i tell if my relays are bad 1 answer
i cant tell if my relays are bad in my car my speed ometer doesent work or my gas gage and my power windows do not work
1993 Mazda Navajo
-
Maintenance & Repair
-
How do I remove the Power Streering belt on a 1992 Mazda B2600i 2.5l 3 answers
I have a 1992 B2600i and am attempting to replace the Alternator belt but can't figure out how to get the Power Steering belt off... no tensioner pulley and no obvious way to move the Power Steering ...
1992 Mazda B-Series Pickup 2 Dr B2600i 4WD Extended Cab SB
-
Maintenance & Repair
-
2003 Mazda PR5 problem starting 7 answers
I have a 2003 Mazda PR5 that intermittently will not start. Changed battery, battery cables, and starter, but we're still having the occasional problem of no start. The car usually starts by the tim...
2003 Mazda Protege5
-
Maintenance & Repair
-
will crank over but will not start... 1989 mazda gtu rx7 9 answers
ok i have a 1989 mazda rx7 gtu with a 13b rotary... i can not get it to start.. i can get it to crank over but i cant get it to start completely.. so i was just checking around and just jumped it to ...
1989 Mazda RX-7
-
Maintenance & Repair
-
Adding power to Mazdas MPS 16 answers
Anyone know what the best way to give a 2007 mazda 3 MPS more grunt? I would like to know where I can get a new chip for it.
2007 Mazda MAZDASPEED3 Sport
-
Car Customization