if the transmission unit is sealed how do i check the fluid?
2 Answers
TonytheWoodsman answered 5 months ago
http://www.mazdas247.com/forum/attachment.php?s=5de5dcf7a8bd9f54bedd87460d849588&attachmentid=148276&d=1240180530 This should be a picture of your trans. dip stick (orange knob). Check when the engine is warm, and running,in( Park), on level ground.
demontoad117 answered 5 months ago
If its a standard it should have 2 bolts on the side of the tranny 1 to fill which is a little higher than the other. The 2nd is to check fluid level. If u unscrew it and fluid seaps out before taking the bolt out then the fluid level is good. Hope this helps
Your Answer
Related Questions
-
sorry i mean the dip stick 2 ck the trans. fluid cant find it 3 answers
2002 Mazda Protege LX
-
Maintenance & Repair
-
How to add transmission fluid 1 answer
2001 Mazda Protege
-
Maintenance & Repair
-
Transmission fluid pan leak-1996 Mazda DLX Protege. Garage mech. told me that if I change fluid to repair and put new fluid in it cold destroy the vehicle. Sound accurate to anyone? 3 answers
Mazda Protege
-
Maintenance & Repair
-
the code reader says that mycars problem is the 4th gear ractio, is this something that can be fixed without replaceing the tranmission? 2 answers
I left my house and drove about 1 mile and my car acted like I had put it in neutral ,so i pulled over and turned the car off, i sat there for about 5 min. and then started it and it went into gear fi...
1996 Mazda Protege 4 Dr LX Sedan
-
Maintenance & Repair
-
where is the transmission fluid intake cap? 1 answer
where do i put transmission fluid?
1997 Mazda 626 LX
-
Maintenance & Repair
Shortcuts
Search Mazda Protege Questions
Mazda Protege Experts
| #1 |
|
Eric098
Reputation
80
|
| #2 |
|
dvigano
Reputation
50
|
| #3 |
|
Jessica Deck
Reputation
40
|