Sign in | Register | My account |

I have a 1999 ford ranger 3.0 and none of my gauges will work. I just recently had a new tranny put in it and I don't know if something wasn't grounded or what?

Crystal Pratt
0

Asked by Crystal Apr 22, 2013 at 12:25 AM about the 1999 Ford Ranger XLT Standard Cab Stepside 4WD SB

Question type: Maintenance & Repair

2 Answers

Tom Demyan
68,265

It almost certaininly sounds that way. Check all your connections and grounds again. It would be impossible for use to know what you did and didn't.

Sean Hensley
135

Either that or a fuse went bad. Check for fuses and any wires that look out of place. If you had a shop do the work and everything worked gauge wise before, take it back and let them look at it.

Your Answer

Related Questions

  • Why doesn't temp. guage work? 1 answer

    Temp. gauge does not work put new sending unit in , still not working. Ran test light from ground to sending unit wire Test light goes on and off and gauge goes to hot, any solutions?

    1984 Ford Ranger STD Standard Cab 4WD SB

    -

    Maintenance & Repair

  • old starter had two wires , new one needs 3? 27 answers

    2000 ranger 4 cylinder,2.5l manual 2wd. Starter went out, replaced with a new one by autozone , the starter spins but will n8t engage. Bench tested on vehicle bendex does not plunge. Took it to auto...

    2000 Ford Ranger XL Standard Cab LB

    -

    Maintenance & Repair

  • does ford have a front end problem 7 answers

    i took my 2008 ford ranger for mvi yesterday,just rolled 32k, and they found 3 balljoints and a tyrod end gone.they blamed it on me parking on gravel,not pavement.i beg to differ.i also have an 88 ran...

    2008 Ford Ranger

    -

    Maintenance & Repair

  • 1991 Ford ranger 3.0 sport cap long bed 7 answers

    Hello I need help finding out what might be wrong with my truck. its a 1991 Ford ranger 3.0 sport cap long bed. now i have replaced the battery no more than 6 months ago and it passed all of Autozone...

    1991 Ford Ranger Sport Standard Cab LB

    -

    Maintenance & Repair

  • I have a 2002 Ford Ranger and it will not turn over, 2 answers

    I have a 2002 Ford Ranger and it will not turn over, starter is good, power to the starter from the battery, fuses all good, ground is tight, battery is new, what could I be missing??

    2002 Ford Ranger

    -

    Maintenance & Repair

Search Ford Ranger Questions

Ford Ranger Experts

#1 Tracy Hooks
Tracy Hooks
Reputation 280
#2 tennisshoes
tennisshoes
Reputation 250
#2 Tom Demyan
Tom Demyan
Reputation 250
View All

Used Cars For Sale