2000 wrangler 5 spd 2.5 4 cyl, jeep isn't catching fire.. Changed the plugs and wires poured gas in the carb and the crankshaft position sensor and it just won't fire up.. The check engine light calle

2000 wrangler 5 spd 2.5 4 cyl, jeep isn't catching fire.. Changed the plugs and wires poured gas in the carb and the crankshaft position sensor and it just won't fire up.. The check engine light calle 2 Answers

My 1999 Jeep Wrangler Sahara's check engine goes on and off and when it goes on, the oil gauge drops to zero and the jeep just barely drives. It does this after about five miles. 1 Answer

1999 wrangler's engine light comes on and goes off. When it comes on, after driving about 5 miles, the oil gauge drops to zero and the jeep just chugs along. I got an oil change and it ran great for...

i own a 2002 Jeep Wrangler Sahara. I've had a complete tune up and changed cam sensor., but the check engine light stays on and when driving around 65 mph, the vehicle starts running rough and acts like its trying to die. the computer at a shop shows that everything that had been changed is needing changed or replaced. Could this be a main computer for the vehicle? 1 Answer

i own a 2002 Jeep Wrangler Sahara. I've had a complete tune up and changed cam sensor., but the check engine light stays on and when driving around 65 mph, the vehicle starts running rough and acts ...

Drove jeep all week and this morning went to start the jeep put in 1st gear and the check engine light comes on and shakes 1 Answer

I just had the spark plugs replaced and oil change done.

My 2000 Wrangler with inline 6 cyl. has a misfire code on cylinders 3 &5. I had a garage replace the coil pack and spark plugs. Code is back ? Injectors ? 6 Answers

It seems to be running smooth with an occasional drop in rpm at a low rpm. Nothing alarming tho. Could it be the injectors ???