i have a question so i swapped a b18b1 in my hatch that had a single cam evwrything is hooked up but it is not starting so is the jumper harness from the single cam the same as a b series

i have a question so i swapped a b18b1 in my hatch that had a single cam evwrything is hooked up but it is not starting so is the jumper harness from the single cam the same as a b series 1 Answer

a relay just caught fire right after a 3-lap test run... i have the photo but im not sure what that relay is... is it for the transmission or is it for something else... 1 Answer

i blew a relay last weekend... it was on fire... im not sure if its for the tranny or the electrical... my car was stalled, battery got drained (purchased it just last year) and my tach and speedomet...

I have a 2001 Honda Civic manual my question is I've been driving for 2 days now and it's been doing the same thing I drive fore probably 5 miles no problem but then my car just gives up , 4 Answers

The rpm keeps going but the car doesn't move like it should then the car dies and I have to park on the side to let it cool down and the its back to the same thing. Can it be my gas pump or what c...

i have a 2000 honda civic ex 1.6l 4 speed basic honda engine that i need to replace the transmission, so my question is what type of transmission do i need to replace i t with, its an automatic 1 Answer

honda base engine with 4 speed automatic transmission,im trying to replace it but dnt want to take it off and look at it,rather just buy the tranny and do it all at once

I have a 2000 Honda Civic Ex that the engine light is coming on. I took it to have the codes read and it came up CSF sensor so I replaced it but the light is still on. I have taken it to so many places and it is now not showing any codes!!! The ECU has been reset and the battery cables have been disconnected and reconnected. What could be the problem? Frustrated..... 1 Answer

engine light was on, checked codes it gave CSF was bad. Replaced it but the light stayed on. The computer was reset then the ECU was reset and drove some more. Now there are no codes showing but the...