i replaced head gaskets, put it back together, thought i got timing right, turned over by hand and there was no resistance. now when i try to start engine cranks over but doesnt start. any ideas???

0

Asked by fishing_fool Jan 17, 2013 at 06:38 PM about the 1998 Honda Accord LX V6

Question type: Maintenance & Repair

29,755

- Report

tenspeed answered 3 months ago

Try some starting fluid. If it fires, check out the fuel delivery system.

Mark helpful

Your Answer

how do you replace the headlight bulbs? 70 answers

what do I have to do to get the bulb out, like remove the finder? Or is there an easier way?

2004 Honda Accord

-

Maintenance & Repair
Coolant Loss 8 answers

I have a 2002 Accord LX 2.3 VETEC with 86K. I am losing coolant, but don't see any leaks. I have replaced the radiator, which was starting to seep at the upper tank. I also replaced the upper and lowe...

2002 Honda Accord LX

-

Maintenance & Repair
Fast Idle on 1988 Lxi coupe 2 answers

Can I change my startup fast idle on this vehicle, it seems to start up okay, but its so fast that the valves make a little noice, I'm thinking its not good for it to start up that fast. I just rebui...

1988 Honda Accord Lxi

-

Maintenance & Repair
Front end Vibration on a 92 Accord 5 answers

Got a 92 Accord with 249000 miles and every time you step on the brakes the front end starts to vibrate. It's hard to tell which side the problem is on. One time it feels like its on the left, the nex...

1992 Honda Accord DX

-

Maintenance & Repair
More power from a F22 VTEC motor? 14 answers

I have a 96 accord and I wanted to replace the head gaskets. Then ideas started popping in my head of things I could do while I was in their. My friend keeps telling me to have the motor bored out, bu...

1996 Honda Accord EX Coupe

-

Car Customization