99 passport 4x4 question
0
Where is the dip stick for the auto tranny and are the front bearings serviceable or have to replace them and if so, are they pressed in the knuckles
20
there is no dipstick.... it's a General Motors 4l30e tranny... they're sealed... the fill plug is on the passenger side of the tranny it's a bolt with a 22mm head IIRC.... yeah the bearings are pressed into the hubs... careful not to mess up the bearing race seat or you'll be doing it again in short order...
Your Answer
| #1 |
|
Mike Bonnell
Reputation
80
|
| #1 |
|
Barry Johns
Reputation
80
|
| #1 |
|
Jonathan Ford
Reputation
80
|