Does TPS need to be calibrated after replacement

Asked by mccomus08 Nov 21, 2012 at 06:51 AM about the 2010 Chevrolet Silverado 1500 Work Truck Ext. Cab

Question type: Maintenance & Repair

7,015

- Report

John answered 5 months ago

The one that attaches to the gas pedal?

2 out of 2 people think this is helpful.

Mark helpful

Your Answer

How do I replace the serpentine belt 2 answers

What are the steps needed to replace the serpentine belt?

2002 Chevrolet Silverado 1500

-

Maintenance & Repair
i replaced my throttle positioning sensor. i may have to change the pressure sensor on my fuel tank. my service engine light is on and my truck stalls as if it is not getting any fuel.how do i bypass 4 answers

tps replaced..if i start my truck and the service engine light is on my truck will stall out. if the service light is off the truck is fine. i know it is a sensor but how can i bypass it...if i keep ...

2000 Chevrolet Silverado 1500 Reg Cab Short Bed 4WD

-

Maintenance & Repair
hard start when warmed up 99 silverado 5.3 11 answers

MY SILVERADO PICKUP STARTS GREAT WHEN COLD BUT WILL NOT START WITH OUT CRANKING FOR PROBABLY AROUND 6 SECONDS. SOMETIMES MORE AND SOMETIMES LESS. IT WILL START BACK UP EASILY RIGHT AFTER YOU SHUT IT O...

1999 Chevrolet Silverado 1500 3 Dr LS Extended Cab SB

-

Maintenance & Repair
Engine Shutting off after about 10-20 seconds on 2004 Silverado 1500 17 answers

Can anyone shed some light on this problem. After driving my 04' Silverado 1500 all day without any problems, after the truck sat in the driveway for a couple of hours, the truck started right up, but...

2004 Chevrolet Silverado 1500

-

Maintenance & Repair
Will the Throttle Position Sensor create large and rapid swing in engine RPM? 1 answer

Howdy, my engine starts cold and races up to 1500 RPM. After it warms up it again increases RPM to 3000. I have read the engine light by ALDL flashes, however, the continual 1 long and 2 short conti...

1988 Chevrolet Beretta

-

Maintenance & Repair

#1		littlehorn Reputation 270
#1		DavidH25 Reputation 270
#3		tenspeed Reputation 200

Does TPS need to be calibrated after replacement

1 Answer

Your Answer

Related Questions

How do I replace the serpentine belt 2 answers

i replaced my throttle positioning sensor. i may have to change the pressure sensor on my fuel tank. my service engine light is on and my truck stalls as if it is not getting any fuel.how do i bypass 4 answers

hard start when warmed up 99 silverado 5.3 11 answers

Engine Shutting off after about 10-20 seconds on 2004 Silverado 1500 17 answers

Will the Throttle Position Sensor create large and rapid swing in engine RPM? 1 answer

Shortcuts

Search Chevrolet Silverado 1500 Questions

Chevrolet Silverado 1500 Experts

Related Models For Sale

Used Cars For Sale